Wet Drawing Machine
Non-tumble wet drawing machine
View product category, application direction, and core equipment information.
Technical Data
Process Range And Operating Parameters
| Item | LT650 | LT560 | LT500 | LT450 | LT350 | LT250 | LT200 |
Roll Diameter(mm) |
650 | 560 | 500 | 450 | 350 | 250 | 200 |
| Drawing Pass(mm) | 7-9 | 11-13 | 15-17 | 11-17 | 11-15 | 17 | 19 |
| Max Inlet Diameter(mm) | g9.0--g6.5 | g6.5 | g5.5 | g4.5 | g3.5 | g2.8--g2.2 | g1.2--g1.0 |
| Mini Exit Diameter(mm) | g4.5 | g3.0--g2.0 | g1.8--g1.4 | g1.7--g1.0 | g1.5--g0.8 | g0.7--g0.3 | g0.3--g0.2 |
| Drawing Speed(m/min) | 200 | 250 | 280 | 300 | 420 | 420 | 600 |
| Inlet Wire Strength(Mpa) | ≦ 1150 | ≦ 1150 | ≦ 1150 | ≦ 1150 | ≦ 1150 | ≦ 1150 | ≦ 1150 |
| Total Compression Ratio(%) | 78.70 | 90.50 | 95.30 | 95--85 | 90--86 | 89.65 | 93.75 |
| Pass Reduction Ratio(%) | 17.58 | 17.88 | 17.05 | 16.22 | 14.28 | 14.04 | 13.58 |
| Motor Power(Kw) | 160-132 | 132-110 | 110-90 | 75 | 55-37 | 37-15 | 11-7.5 |